IoT Products

F7113 GPS + GPRS TRACKER is an independent research and development of wireless car GPS positioning terminal ,which is designed by Xiamen Four-Faith Communication Technology Co., Ltd.By using global satellite positioning system (GPS), geographic information systems (GIS), public cellular network (GPRS) ,it provide user online vehicle RMON.

The product uses the high-performance industrial-grade 32-bit communications processor, industrial-grade GPS positioning module and industrial grade wireless module, taking embedded real-time operating system software as support platform, providing RS232 interface (with the +5 V power output) for communication with external multiple RS232 devices, and the flexibility of the equipment used; design of low-power, lowest power consumption less than 1mA; 9 IO channels for digital input、digital output, pulse output, analog input, pulse counting function .

The product can be widely used in car networking in various industries, such as buses, taxis, police cars, armored car, law enforcement vehicles, logistics team, school bus, class lines bus, tourist bus, dangerous chemicals, freight cars and other vehicles .

 

Features and Benefits

 

1.Real-time wireless data transmission via SMS or GPRS (TCP / UDP)

2.Vehicle roll call monitoring

3.Historical track playback

4.Real time monitoring

5.Distance monitoring(optional)

6.Listener (optional)

7.GSM blind compensation

8.GPS blind compensation(optional)

9.Can store 9000 messages

10.Acceleration sensor(optional)

11.SOS alarm

12.Motion alarm

13.Electronic fence

14.Yaw alarm

15.Undervoltage alarm

16.Down alarm

17.Speed alarm

18.Ignition detection

19.Door switch alarm

20.Power off (optional)

21.Speed detection

22.GPS antenna detection alarm

23.Timeout car alarm(optional)

24.Overtime parking alarm(optional)

25.Built-in lithium battery life of 8 hours

26.Two power system,Car electric and lithium battery,which can automatically switch

27.Remote management, remote upgrade

28.RS232 port with +5 V power output controllable

29.IO: 5 digital inputs, 2 OD gate output

30.Analog signal input: 2 analog input can be connected to the fuel tank sensor or other sensors.

31.Provides powerful GIS electronic map management software, convenient device management

32.WDT watchdog design to ensure the stability of the system

33.Low-power design, support for multi-stage sleep and wake mode to minimize power consumption

34.Built-in real-time clock (RTC), support the timer switch function, timing shutdown state power consumption less than 1mA

35.Wide power input (DC 9 ~ 35V), with over-current, over-voltage, reverse polarity protection.

Technical Specification

Wireless parameters

Item

Content

Cellular Module

Industrial cellular module

Standard and Band

EGSM900/GSM1800MHz, GSM850/900/1800/1900MHz(optional)

Compliant to GSM phase 2/2+

GPRS class 10, class 12(optional)

Bandwidth

85.6Kbps

TX power

GSM850/900: <33dBm

GSM1800/1900: <30dBm

RX sensitivity

<-107dBm

 

GPS parameters

Item

Content

GPS module

Industrial GPS module

Receiver Type

50 channels,GPS L1 Frequency ,C/A code,SBAS:WAAS,EGNOS,MSAS

TTFF

Cold Start:32S

Warm start: 32S

Hot start: 1S

Auxiliary start: 3S

Receiver sensitivity

Tracking and positioning:-160dBm

Recapture:-160dBm

Cold start:-146dBm

Hot start:-156dBm

Horizontal positioning accuracy

GPS:2.5m

SBAS:2.0m

Speed Accuracy

0.1m/s

Heading progress

0.5 degrees

 

Hardwaresystem

Item

Content

CPU

Industrial grade 32 communications processors

FLASH

2MB (expandable 8MB), for the blind compensation data storage, configuration parameters are stored, remote upgrade.

SRAM

512KB (expandable to 1MB)

 

 

 

Interface Type

Item

Contents

Serial ports

1 RS232 serial port with +5 V controlled power output, with short-circuit protection. Can be flexible external expansion devices, such as TTS voice box, image acquisition. 15KV ESD protection, serial rate: 110 ~ 230400bits / s.

Indicator

Power, Act, Online, GPS indicator

Antenna Interface

Standard SMA female interface, 50 ohm

SIM / UIM card interface

Standard user card drawer interface, support 1.8V/3V the SIM / UIM card, built-in 15KV ESD protection

Power Interface

Car terminal interface, built-in power inverting protection, overcurrent protection, overvoltage protection.

 

Power supply

Item

Contents

Standard power

DC 12V

Supply range

DC 9~35V

 

Power consumption

Work status

Power Consumption

Communication status

110mA@12VDC;

Standby

30mA@12VDC;

Hibernation

8mA@12VDC;

Timing shutdown state

0.6mA@12VDC;

 

Physical characteristics

Item

Contents

Shell

Metal housing, protection class IP30. The shell and system security isolation, particularly suitable for industrial control field applications

Dimensions

91x58.5x27 mm (Not including antenna and mounting)

Weight

220g

 

Other parameters

Item

Contents

Operating Temperature

-20~+55ºC  (-4~+131℉)

Extended Operating Temperature (No battery)

-30~+75ºC  (-22~+167℉)

Storage Temperature

-40~+85ºC  (-40~+185℉)

Relative humidity

95%(Non-condensing)

 

Other parameters

Item

Contents

Operating Temperature

-20~+55ºC-4~+131

Extended Operating Temperature (No battery)

-30~+75ºCˆ-22~+16

Storage Temperature

-40~+85ºC-40~+185

Relative humidity

95%(Non-condensing)

CHARACTERISTICS:

Mechanics » Mounting » Clip
Power Supply » AV Voltage Supply » 110V - 240V
Environment » Temperature Range » Industrial (-25°C / +65°C)
Environment » Temperature Range » Automotive (-40°C / +85°C)
Interface » Bus System » M-BUS
Interface » Type of Inputs / Outputs » Digital

vehicle GPS + GPRS TRACKER device