IoT Products

F3434 series ROUTER is a kind of cellular terminal device that provides data transfer function by public cellular network.

 

It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422), Ethernet and WIFI port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial, Ethernet and WIFI devices with only basic configuration.

 

It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.


Technical Specification

Cellular Specification:
Cellular Module Industrial cellular module
Standard and Band UMTS/WCDMA/HSDPA/HSUPA 850/1900/2100MHz
850/900/1900/2100MHz(optional)
GSM850/900/1800/1900MHz
GPRS/EDGE CLASS 12
Bandwidth HSUPA:5.76Mbps
(Upload speed)
HSDPA:7.2Mbps
(Download speed)
UMTS:384Kbps (DL/UL)
TX power <24dBm
RX sensitivity <-109dBm
WIFI Specification
Standard IEEE802.11b/g
IEEE802.11n (optional)
Bandwidth IEEE802.11b/g: 54Mbps (max)
IEEE802.11n: 300Mbps (max)
Security WEP, WPA, WPA2, etc.WPS (optional)
TX power 16-17dBm(11g), 18-20dBm(11b)
RX sensitivity <-72dBm@54Mpbs
Hardware System
CPU Industrial 32bits CPU
FLASH 8MB(Extendable to 16MB)
SRAM 64MB
Interface Type
WAN 1 10/100 Mbps WAN port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection
LAN 4 10/100 Mbps Ethernet ports(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection
Serial 1 RS232(or RS485/RS422) port, 15KV ESD protection
Data bits: 5, 6 ,7, 8
Stop bits: 1, 1.5(optional), 2
Parity: none, even, odd, space(optional), mark(optional)
Baud rate: 2400~115200 bps
Indicator "Power", "System", "Online", "Alarm", " Local Network ", "WAN", "WIFI", "Signal Strength"
Antenna Cellular: Standard SMA female interface, 50 ohm, lighting protection(optional)
WIFI: Standard SMA male interface, 50 ohm, lighting protection(optional)
SIM/UIM Standard 3V/1.8V user card interface, 15KV ESD protection
Power Standard 3-PIN power jack, reverse-voltage and overvoltage protection
Reset Restore the router to its original factory default settings
USB Standard A type USB host interface (reserved)
Power Input
Standard Power DC 12V/1.5A
Power Range DC 5~35V
Communication <450mA (12V)
Physical Characteristics
Housing Iron, providing IP30 protection
Dimensions 157x97x25 mm
Weight 440g
Environmental Limits
Operating Temperature 35~+75ºC(-31~+167°F)
Storage Temperature -40~+85°C(-40~+85°F)
Operating Humidity 95% ( Non-condensing)

Features and benefits

 

Design for Industrial Application

  • High-powered industrial cellular module
  • High-powered industrial 32bits CPU
  • Support low-consumption mode, including sleep mode, scheduled online/offline mode, scheduled power-on/power-off mode(optional)
  • Housing: iron, providing IP30 protection.
  • Power range: DC 5~35V

Stability and Reliability

  • Support hardware and software WDT
  • Support auto recovery mechanism, including online detect, auto redial when offline to make router always online
  • Ethernet port: 1.5KV magnetic isolation protection
  • RS232/RS485/RS422 port: 15KV ESD protection
  • SIM/UIM port: 15KV ESD protection
  • Power port: reverse-voltage and overvoltage protection
  • Antenna port: lightning protection(optional)

Standard and Convenience

  • Support standard RS232(or RS485/RS422), Ethernet and WIFI port that can connect to serial, Ethernet and WIFI devices directly
  • Support standard WAN port and PPPOE protocol that can connect to ADSL directly
  • Support intellectual mode, enter into communication state automatically when powered
  • Provide management software for remote management
  • Support several work modes
  • Convenient configuration and maintenance interface(WEB or CLI)

High-performance

  • Support double link backup between cellular and WAN(PPPOE, ADSL) (optional)
  • Support VPN client(PPTP, L2TP, IPSEC ,GRE and OPENVPN)(only for VPN version)
  • Support port mirror function(optional)
  • Support WIFI AP, WIFI AP client and WDS(optional)
  • Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout
  • Support APN/VPDN
  • Support wireless video monitoring and dynamic picture transfer
  • Support DHCP server and client, DDNS, firewall, NAT, DMZ host etc.
  • Support multi protocols, such as TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP, etc.

CHARACTERISTICS:

Interface » Type of Inputs / Outputs » Analog
Interface » Type of Inputs / Outputs » Digital
Interface » Bus System » M-BUS
Environment » Temperature Range » Industrial (-25°C / +65°C)
Mechanics » Protection Class » IP20
Mechanics » Vibration » Shock Resistant
Power Supply » DC Voltage Supply » 5-24V

F3434 Specification
F3434 User manual