Mouser offers TDK InvenSense SmartIndustrial sensor platforms
Among the latest Internet of Things (IoT) products available from Mouser are the TDK InvenSense SmartIndustrial Sensor Platforms. These include 6-axis MEMS inertial measurement units (IMUs) as well as 3-axis accelerometers.
TDK InvenSense SmartIndustrial Sensor Platforms include 6-axis MEMS inertial measurement units (IMUs) as well as 3-axis accelerometers. The IIM-46230, IIM-46234, and IIM-42652 are 6-axis IMUs that incorporate a 3-axis gyroscope and 3-axis accelerometer into a compact package while the IIM-42352 and IIM-42351 are 3-axis accelerometers.
All of these products provide a digital-output temperature sensor and are RoHS and green compliant. TDK InvenSense SmartIndustrial Sensor Platforms are ideally suited for a range of applications, including robotics, tilt sensing, platform stabilisation, navigation, industrial automation, and much more.
The IIM-46230 and IIM-46234 are packaged in a module that measures 23mm x 23mm x 8.5mm with a 20-pin connector. The IIM-46230 offers 4.1°/hour gyroscope bias instability and the IIM-46234 has 1.9°/hour gyroscope bias instability. These sensors include multiple capabilities to enable easy, robust, and accurate inertial measurements in industrial applications. They utilise a proprietary TDK SensorFT (Fault Tolerance) feature that delivers built-in redundancy and early warnings. The IIM-46230 and IIM-46234 have an operating temperature range of -40°C to +85°C.
The IIM-42652 comes in a small 2.5mm x 3mm x 0.91 mm 14-pin LGA package and supports an extended operating temperature range of -40°C to +105°C. The IIM-42652 features a 2K-byte FIFO that can lower traffic on the serial bus interface and reduce power consumption by allowing the system processor to burst-read sensor data and then enter a low-power mode.
The IIM-42352 and IIM-42351 provide a 3-axis accelerometer packaged in a small 2.5mm x 3mm x 0.91mm 14-pin LGA module. The digital-output X-, Y-, and Z-axis accelerometer has a programmable full-scale range of ±2g, ±4g, ±8g, and ±16g. These modules promote low noise (70µg/√Hz) and low power (0.3mA with all 3 axes delivering full performance). The IIM-42352 and IIM-42351 support an extended operating temperature range of −40°C to +105°C.
Evaluation kits and development kits are available.
Comment on this article below or via Twitter @IoTGN