3DTC is perfectly suitable to count exactly vehicles on ramps and at cross-sections of car parks and underground parking facilities. The MagSense 3DTC sensor is fixed at the ceiling of the level below. This low-cost kind of installation does not require joints to be cut into the ramp and it is no problem to use several sensors beneath wide ramps.
|
Voltage supply |
8-35V |
|
Average power |
5W |
|
Max current consumption |
3A |
|
Protection |
Fuse 3A |
|
Electrical connection |
Screw terminals up to 2.5 mm2 |
|
Inputs |
6 x Input /4 X Output (software configurable) Analog / Digital / Impuls |
|
Sensors |
3 axis Accelerometer 3 axis Magnetometer Thermometer −20°C / +100°C - ±0.5°C |
|
GPRS |
Class 10, PDU, SMS, Quadband SIM port / Embedded SIM External antenna |
|
GPS |
u-blox 7, External (MMCX) or internal antenna |
|
CAN BUS |
2x CAN BUS (CAN-H,CAN-L,POW, GND) |
|
RS485 BUS |
485-A, 485-B, Power, GND |
|
Case |
Polyamide, UL 94 V-2, DIN-rail 35 mm × 7.5 mm according to EN 60715, IP20 |
|
Operating temperature |
-20°C do +45°C |
|
Storage temperature |
-20°C do +60°C |
|
Interference emission |
Class A - only for industrial use |
|
Electromagnetic compatibility (EMC) |
DIN EN 61326-1 |
