IoT Products

Advanced search

D4620WD - Neteye Series

by Netisit

Internet (network) access devices

D4620WD is a DIDO to wireless Converter.

It has 6Digital Input (6 counter included) Channels and 2 Digital output Channels.

you can handle DIDO data through general TCP/IP Wireless network.

It support 802.11b/g standard network.

 

**Application Fields

Factory Automation , Building Automation, SCADA, Subway,

 

D4620WD - Neteye Series
Technical Specification

Technical Specification

System
  CPU : 8-Bit Micro Controller, 88.4736Mhz
  Memory
- 64Kbytes Code Memory
- 64KBytes Data Memory
Network Interface
  Wired Interface : 100 Base-T Ethernet Interface (IEEE 802.3)
  Wireless Interface
- 802.11b/g/n standard
- Frequency Range : 2.4~2.4835 GHz
- Modulation : - 11g : OFDM(64QAM, 16QAM, QPSK, BPSK)
                    - 11b : DSS(CCK, DQPSK, DBPSK)
- Antenna : 50ohm external antenna
- Tx power : typical 14dBm (max 17dBm)
- Rx sensitivity :-89dBm(@11Mbps),-74dBm(@54Mbps),-66dBm(@150Mbps)
Network Protocol TCP/UDP/IP/ICMP/ARP, IEEE802.3(Standard Ethernet)
Device ability TCP Server
Digital Input
Interface
  Isolated Digital(pulse) Input 6 Channel (-50 ~ 50VDC)
  Sink current 400mA Max
  Isolation Voltage: 2500Vrms
  Input resistance : 2.4k @ 0.5w (for digital Input/ pulse Input)
  1 Ch Independent mode
  2~6 Ch Common mode
Digital Output
Interface
  Isolated Digital Output 2 Channel
  Photo Relay. Max 600mA
  Isolation Voltage : 2500Vrms
Indicators
  RUN(Red) : Blink when system status is good
  WLS(Orange) : It lights on when Wireless Running
  LINK(Green) : It lights on when connected LAN cable
  TX(Green) : It lights on when Data Transmisson
  RX(Yellow) : It lights on when Data Received
  Lev(Red) : It lights on when High Level Signal mode
  DI1(Green) : It lights on when Received High Level Signal at Digital Input Port 1
  DI2(Green) : It lights on when Received High Level Signal at Digital Input Port 2
  DI3(Green) : It lights on when Received High Level Signal at Digital Input Port 3
  DI4(Green) : It lights on when Received High Level Signal at Digital Input Port 4
  DI5(Green) : It lights on when Received High Level Signal at Digital Input Port 5
  DI6(Green) : It lights on when Received High Level Signal at Digital Input Port 6
  DO1(Red) : It lights on when Controlled Port 1 Relay On state
  DO2(Red) : It lights on when Controlled Port 2 Relay On state
Utility Software NetEyeD4620WD Web Setup Program
Simulator:Test Result Display Demo Program
Environment
  Input Current : max 400mA
  Input Power : DC5V
  Humidity : 0 ~ 95%
  Operating Temperature : 0 ~ 50 °C
  Storage Temperature : -20 ~ 70 °C
Dimension 98mm(W) * 130mm(H) * 33mm(D)

Industrial Applications » Process Monitoring

Industrial Applications » Process Control, SCADA

Energy » Power Monitoring (Quality)

CHARACTERISTICS:

Interface » Type of Inputs / Outputs » Digital
Environment » Temperature Range » Industrial (-25°C / +65°C)
Power Supply » DC Voltage Supply » 3.3 - 5 V

Have questions?