Firmware updates via DALI interface are now part of DALI-2 certification
Paul Drosihn of DALI Alliance
The DALI Alliance has extended the DALI-2 certification programme to include firmware updates via the DALI interface in devices including control gear, application controllers and input devices such as sensors. Firmware updates are specified in Part 105 of the IEC 62386 standard.
Part 105 defines how firmware in a DALI device can be updated after production or shipping of the product, or in the field. Updates are made via the DALI interface. This can be done either to fix bugs and improve performance, or to add new features.
“The ability to update firmware in DALI devices represents another important step forward for our DALI-2 certification programme,” says Paul Drosihn, DALI Alliance general manager. “It offers the possibility to avoid expensive on-site visits or even replacement of components, and future-proofs the installation.”
DALI-2 certification is now available for control gear and control devices that successfully implement Part 105. The DALI-2 tests enabling certification were created by the DALI Alliance and are based on Edition 2 of Part 105, which has not yet been published. Edition 2 includes a series of updates compared with Edition 1,
which was published in March 2020.
Firmware changes could be made in the DALI-related operation of the product, or in its application-specific part. In the former case, it is likely that some re-testing will be required to maintain DALI-2 certification.
Firmware transfer files are recommended to use the “.d2fw” filename extension.
To provide further support for firmware updates, the DALI Alliance has published a guidance document entitled “Firmware update checklist.” This can be used to manage the risk of updating control gear firmware at a live site in the field. A similar checklist could be used when updating control devices.
Comment on this article below or via Twitter @IoTGN