IoT Products

Brief introduction
HYM740P UHF RFID reader modules uses R2000 chip, which complies with EPC
C1G2 protocol, its working frequency is 840~960MHz, with LBT function. It
supports dense reader working mode( DRM)。 Max Power is 33dbm. With standard
8dBi antenna, the reading distance can reach 15 meters, maximum identifying speed
can reach 400/S; with simple power supply and interface circuit, a high-performance
RFID system can be established. It is suitable for logistics, costume, medical industry,
and complex assets management, etc.

Technical Specification

Technical data

No Item Technical data Unit Remark
1 Max current 1600 mA Max power output
2 Standby
current
≤1 mA EN pin low level
3 Frequency
range
840~960 MHz
4 Defaul
working
frequency
Frequency hopping MHz Frequency interval 250KHz
5 Channel
bandwidth
≤250 KHz
6 Frequency
hopping speed
≤2 s
7 Fixed power 33 dBm
8 Stepping
interval
1 dB 5~30dBm, adjustable by
software
9 Label protocol EPC C1G2
/ISO18000-6C
10 Communicatio
n protocol
Asynchronos serial
ports protocol
11 Starting time ≤50 ms
12 Radio-frequen
cy power
rising time
≤500 μs
13 Radio-frequen
cy power
droping time
≤500 μs



RFID Reader Module
3

14 Adjacent
channel power
leaking ratio
≤-40 dB ±1CH
≤-60 dB ±2CH
15 Frequency
stablizing ratio
±10 ppm -25℃~+40℃
±20 ppm -40℃~+60℃
16 Max reading
range
15 m 8dBi antena
17 Muti-tags >400/s


Characteristics of DC

Data Mini
value
Typical
value
Max value Unit Remark
Voltage of power 3.3 4 5.5 V Direct current
Input high level 2 3.3 3.5 V GPIO
2 3.3 3.5 V EN
Input low level -0.5 0 0.5 V GPIO
- - 0.18 V EN
Output high
level
2.3 - 3.3 V GPIO
Output low level 0 - 1 V GPIO
Enable current 2 5 25 uA VEN≥2V


Requirement on antenna

No Item Technical data Unit Remark
1 VSWR 1.5


Appearance and structure
 Size: 55.9×35.6×7.5mm
 Weight: 20g

TRANSMISSION PROTOCOLS:

CDMA EvDO Rev. A » GSM/GPRS